MIG & TIG
ERNiFeCr-1 is used for TIG or MIG welding of Incoloy 825 and other nickel-chromium-molybdenum-copper alloys. Incoloy Filler Metal 65 can be also used to overlay cladding where similar chemical composition is required.
Product Detail
| C | Mn | Fe | P | S | Si | Cu | Ni | Ti | Cr | Mo | Al |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.05 | ≤1 | ≥22 | ≤0.03 | ≤0.03 | ≤0.5 | 1.5-3.0 | 38-46 | 0.6-1.2 | 19.5-23.5 | 2.5-3.5 | ≤0.2 |
| Tensile Strength MPa(ksi) | Yield Strength MPa(ksi) | Elongation % | |
|---|---|---|---|
| AWS requirement | 550(80) | Not specified | Not specified |
| Typical results as welded | 550(80) | - | 25 |
| Process | Diameter(mm) | Volt | Amps (flat) | GAS |
|---|---|---|---|---|
| GTAW | 0.9 | 12 – 15 | 60 – 90 | 100% Argon |
| GTAW | 1.2 | 13 – 16 | 80 – 110 | 100% Argon |
| GTAW | 1.6 | 14 – 18 | 90 – 130 | 100% Argon |
| GTAW | 2.4 | 15 – 20 | 120 – 175 | 100% Argon |
| GTAW | 3.2 | 15 – 20 | 150 – 220 | 100% Argon |
| GMAW | 0.9 | 26-29 | 150-190 | 75% Argon+25%Helium |
| GMAW | 1.2 | 28-32 | 180-220 | 75% Argon+25%Helium |
| GMAW | 1.6 | 29-33 | 200-250 | 75% Argon+25%Helium |
| SAW | 2.4 | 29-32 | 300-350 | Suitable Flux |
Welding Wire
Welding Rod
| Form | Diameter | Length, | Packaging |
|---|---|---|---|
| MIG Spools | 0.8mm /1.0mm /1.2mm /1.6mm | - | 33 lbs (15kgs) |
| TIG Cut Lengths | 2.0mm /2.4mm /2.5mm /3.2mm /4.0mm /5.0mm | 915mm- 1000mm | 11 lbs (5kgs) |
| Reels And Coils | 2.0mm /2.4mm /2.5mm /3.2mm /4.0mm /5.0mm | - | 60 lbs (27kgs) |
